Fix a DEAD mobile scanner

If the Symbol CS3000 or CS3070 scanner appears to be inoperable (i.e. won't scan, won't charge, etc), please follow the procedure below to reset the device.

  1. Disconnect the scanner if plugged in
  2. Slide off the silver cover on the back of the unit  (generally connected to a lanyard)
  3. Depress the small reset button with a paperclip for 5 seconds
  4. Press the Scan (+) button, several flashing lights should appear
  5. Plug in the scanner.  It should beep and begin charging normally

 

Have more questions? Submit a request

0 Comments

Article is closed for comments.